Vicmarc V00639 VM 90/100 Bowl Jawset (220mm)
Notify me when back in stock
Vicmarc VM 90/100 Bowl Jawset
The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internally or externally, with 8 unique soft plastic stoppers which are mounted on the face of the Jaws.
The size of the jaw indicates the maximum diameter of the bowl that can be mounted on the jaw, for example a 220mm Bowl Jaw will hold a 220mm Bowl and so on.
- 220mm (max bowl size): This size was specifically made to suit smaller lathes from 220mm up to 300mm diameter swing.
- 285mm (max bowl size): The adjustable jaws allow you to re-chuck bowls for finishing the bottom or too light clean-up work on the foot of the bowl. To mount the bowl, the nowl is reversed and held by the rim, either internal or external, with 8 uniqye soft plastic stoppers, which are mounted on the face of the jaws.
- 385mm (max bowl size): The numerous mounting holes on the face of the jaws allow you to locate the stoppers in
- any number of positions. The sizes listed are the maximum diameter of the bowl that can be mounted on the jaw.
Be The First To Review This Product!
Help other Timberbits users shop smarter by writing reviews for products you have purchased.