Festool 18V Drill

SKU: 576491
Please allow 5 working days for delivery.
In stock
Currently In Stock
Fast Shipping Australia Wide
365 Day returns
Domestic Shipping - $25.00
Warehouse Collection - FREE
No charges when collecting from our warehouse located at 6/8 Wilmette Pl, Mona Vale NSW 2103. Timberbits will call to confirm when the order is ready. Collect between Monday - Friday 10 am-5 pm. Looking for shipping? Please check your cart and remove any dangerous goods as these are not eligible for shipping.
Product Information

Festool 576491 TID/PDC 18V 2 Piece Impact Driver and 4 Speed Hammer Drill 5.2Ah

This compact powerhouse offers an impressive service life thanks to its extremely robust hammer mechanism. The perfect combination of the new generation brushless EC-TEC motor and the battery pack ensure maximum performance and endurance. In addition to this, the TID 18 with 1/4" tool holder turns the screw without straining your wrist – thanks to the tangential hammer mechanism with no strength sapping back torque. Festool 18V drill weight of just 960 grams also allows you to work for longer without becoming tired.


  • Robust: Long-lasting quality components, also fully covered thanks to the comprehensive support provided by Festool Service
  • Maximum power: Thanks to the extremely powerful, brushless, and therefore long-lasting, latest generation EC-TEC motor with three speed levels, 180 Nm torque and additional T-mode specifically for self-tapping screws
  • Safe: kickback-free tangential hammer mechanism protects your wrist
  • Ergonomic: compact design enables you to work accurately and for longer without becoming tired, even in hard to reach areas
  • Flexible battery system: For applications with high power needs, the 4.0 Ah Li-HighPower Compact battery pack provides the ideal powerful, compact and lightweight solution. For even less weight, opt for the 3.1 Ah Compact battery pack for light screw joints
  • Convenient: tool-free 1/4" holder, integrated bit storage, optimum LED illumination of the work area, belt clip for attachment on both sides
  • Mobile: packed in a Systainer³, the TID 18 can be integrated perfectly into the bott vehicle fixture for easy transport from the body shop to the building site

Main Applications:

  • Screwdriving work that protects your wrist, with no reverse torque
  • Furniture assembly and kitchen fitting
  • Installation of fittings, rear walls, strips
  • Installation of doors and windows
  • Screwdriving in wood, metal and plastic
  • Fences, pergolas, carports, canopies
  • Production of wooden substructures


  • TID 18 Cordless Impact Driver
  • PDC 18 Cordless Hammer Drill
  • 2 x 18V Li-Ion 5.2 AH Airstream Battery Packs
  • Rapid charger TCL 6
  • FastFix Keyless Chuck 13 mm
  • Additional Side Handle
  • Belt clip
  • Systainer SYS3 M 237
  • Tool manual

Technical Specs:

  • Tool Weight (kg): 1.3 kg
  • No Load Speed 1st Gear (rpm): 0 - 1200 min⁻¹
  • No Load Speed 2nd Gear (rpm): 0 - 2000 min⁻¹
  • Battery Voltage (V): 18 V
  • Battery Capacity (Ah): 3.1/ 4.0 / 5.2/ 6.2 Ah
  • Power Source: Cordless
  • Motor Type: Brushless
  • Battery Type ie. Lithium-ion: Lithium-ion
  • Gears: 3 + T-Modus
  • Maximum Torque Wood (Nm): 180 Nm
  • No Load Speed 3rd Gear (rpm): 0 - 3200 min⁻¹
  • Maximum Impact Rate (imp): 4 500 min-¹
  • Maximum Screw Diameter (mm): 8 x 220 mm
Australian Owned and Operated

We are a small operation specialising in servicing the needs of woodturners and woodworkers in Australia and around the globe. With a small team of friendly staff we are ready to help you with your woodworking needs. Orders can be placed over the phone, online or you can pop into the shop to make your purchase...Read more