Robert Sorby RS2000 Deep Hollowing System(Set Type:RS2000)

Code: 5013035029750

$630.00
In Stock

Set Type



The RS2000 System was developed from an original idea by American woodturner, Dennis Stewart. It is a flexible system which enables deep vessel hollowing with the minimum of timber wastage. Indeed several bowls may be produced from one blank thereby saving money on expensive timbers.

The RS2000 System lends itself not just to hollow forms but with the use of the slicer will produce picture frames and other large rings.

The RS2000 System and its predecessor have now been sold throughout the world for more than ten years. Following heavy demand, the arm brace which helps to control the tool in use has been re-introduced. This is available separately.

The full RS2000 System is supplied in a compact, robust mahogony stained and lacquered case fitted with brass clasps and hinges, carrying handle and instruction manual. The lid is designed, as illustrated, to hold the Robert Sorby 7" callipers 977 (available separately).

 

Slicer RS205

The hollow ground nose of the tungsten carbide tip allows deep plunge cuts, at any angle, to remove cones from bowls and vessels. The Slicer can also be used as a heavy-duty parting tool. The Slicer should be mounted in the Main Handle with the Side Handle assembled at a convenient position on the Slicer blade. It is recommended that the Side Handle be placed in the vertical position to counteract downward forces.

 

Hooker RS21O

This provides a safe method of hollowing vessels with restricted openings. The Hooker can be used either in-board or out-board. The HSS Cutter can be turned to any position for both roughing and finishing cuts. The Side Handle counteracts rotational forces. Alternatively the Slicer and Hooker can be fitted into the Arm brace (RS206) for additional support.

 

RS2000 Deep Hollowing Complete System comes with the following items.

RS202 - Main Handle

RS203 - Side Handle

RS203C - Collar for side handle

RS203S - Stud for side handle

RS204 - Extension Shank

RS205 - Slicer

RS210 - Hooker (inboard/outboard)

RS211 - Swivel Tip Complete

RS215 - ½ ø Dual Purpose Shank

RS215C - Chattertool Collar for R5215

RS220 - Square/Polnted Chattertool Cutter

RS221 - Domed/Hollow Chattertool Cutter

RS223 - Allen Key (1/8" AF)

RS223S - Replacement 10 UNF Cap Screw

RS224 - Diamond Sharpening File

RS225 - ¼" BSW Tee Knob

 

RS2001 Deep Hollowing Basic System comes with the following items.

RS202 - Main Handle

RS203 - Side Handle

RS203C - Collar for side handle

RS203S - Stud for side handle

RS204 - Extension Shank

RS205 - Slicer

RS210 - Hooker (inboard/outboard)

RS211 - Swivel Tip Complete

RS223 - Allen Key (1/8" AF)

RS223S - Replacement 10 UNF Cap Screw

RS224 - Diamond Sharpening File

RS225 - ¼" BSW Tee Knob

 

Note: There is no FREE shipping for orders with these cases outside Australia. Additional shipping charges will apply to overseas orders.

Item weight is 5.7kg. Please see our shipping information page to see how much the additional shipping charges will be.

(30900)

SKU 30900
Brand Robert Sorby
Shipping Weight 5.6950kg

Be The First To Review This Product!

Help other Timberbits users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought



More From This Category