Tormek DF-200 Diamond Wheel Fine
Diamond grinding wheel for Tormek T-4.
- Effective steel removal combined with a smooth finish.
- Constant shape always maintains the same diameter.
- Sharpens all types of steel and ceramic.
- Allows sharpening on the side of the grinding wheel to get a completely flat bevel.
- Exceptional durability with diamond, the world's hardest abrasive.
A grinding wheel for all materials
With this diamond wheel, you can sharpen nearly any type of material, including steel, ceramic and carbide. DF-200 Diamond Wheel Fine fits Tormek T-4 Original, Tormek T-4 Bushcraft, Tormek T-3 and earlier models with a 200 mm diameter grinding wheel.
Simplifies repeat sharpening
All of Tormek's diamond grinding wheels have exceptional durability with a constant removal rate and shape, which means that they always stay round and flat with a full-size diameter. Users who often sharpen the same tool benefit greatly from this, as it simplifies both setting and grinding.
Get a completely flat bevel
The constant shape makes it possible to grind either on the side of the wheel or on its upper surface. Side grinding is perfect for smaller tools such as knives, chisels, carving gouges and v-tools. The result is an edge with a completely flat bevel, instead of a slight hollow grind.
For sharpening on the side of the diamond wheels, we recommend using the MB-100 Multi Base together with the jig designed for your specific tool. Both the base and the jigs give you support and control throughout the sharpening process.
Rust protection for increased service life
All diamond wheels are supplied with 150 ml of ACC-150 Anti-Corrosion Concentrate. Always add the concentrate to the water when sharpening with water to prevent rust on the grinding wheel. Add 10 ml of concentrate to 250 ml water (~4 %). We recommend always using water when sharpening diamond wheels, as it both prolongs the life of the wheel and provides a smoother grinding surface. It is also possible to sharpen without water.