Pro Easy Hollowers combine long maple handles with three bar profiles for larger hollow forms. The straight #1 tool has different dimensions and a greater rated reach than the curved #2 and #3 tools.
Profile choices
- #1, straight: for initial hollowing in the centre of a vessel.
- #2, slightly curved: for working into the curved sides.
- #3, more curved: for reaching beneath the inside lip.
Dimensions by profile
- #1: 32 in overall (approx. 813 mm); stainless steel bar 1/2 x 3/4 in in section and 12 in long (approx. 12.7 x 19.1 x 305 mm). Maximum reach beyond the tool rest: 8 in (approx. 203 mm).
- #2 and #3: 29 1/2 in overall (approx. 749 mm); stainless steel bar 1/2 x 1 in in section and 9 1/2 in long (approx. 12.7 x 25.4 x 241 mm). Maximum reach beyond the tool rest: 6 in (approx. 152 mm).
- All three have a 20 in (approx. 508 mm) American maple handle.
Cutters and supply
Each selected tool has a Ci3 standard round carbide cutter fitted and includes a hex key. The optional Ci3-NR negative rake cutter is sold separately.
Keep the bar flat on the tool rest, the tool parallel to the floor and the cutting edge at the centreline of the work. Rotate the cutter to an unused edge as needed, then replace it when the usable edges are worn.
For replacement cutters, match the cutter reference listed above with our Easy Wood Tools carbide cutters.
Downloadable guides
Trusted By





We are a small operation specialising in servicing the needs of woodturners and woodworkers in Australia and around the globe. With a small team of friendly staff we are ready to help you with your woodworking needs. Orders can be placed over the phone, online or you can pop into the shop to make your purchase...Read more