Milescraft 1325 Pocket Jig 200
The Milescraft PocketJig200 pocket hole jig allows you to connect your workpieces in a quick and timely manner. Whether you want to build storage projects, cabinets, shelves or bookcases, this kit does it all. Allowing you to create corner joints, T-Joints, Framing Joints, Miter Joints and do repairs. With built-in settings for board thicknesses, there is no need to manually measure. Just set this pocket jig to your desired setting, set the depth of your bit and start drilling.
Features:
- PocketJig200 Pocket Hole Jig Kit – Designed To Make Repairs Simple
- Spring-loaded sled adjust button allows the jig to be set to do repairs of any nature around your home or your shop
- Built-In Imperial And Metric Scales
- The built-in scales allow you to easily measure the thickness of your workpiece
- Board Thickness Settings
- There are four common board thickness settings built into the pocket jig: 1/2”, 3/4”, 1” and 1-1/2” (12, 19, 27, 38mm)
- Easy readout arrow to help define your board thickness setting
- Easily adjust to your board thickness setting with the single sled design and sled adjust button
- Hardened Steel Drill Bushings
- For precise and accurate pocket holes every time using the Milescraft PocketBit
- Tight tolerances between the bushing and the drill bit, reduce tear-out and create a clean pocket hole on the first try
- Recessed Clamp Pocket With Magnet
- Helps to keep the clamp in the same position as you move to different locations
- With the stronger rare earth magnet, you can easily clamp the jig from one location to another
- For speed and accuracy, use the Milescraft FaceClamps
- Convenient Built-In Depth Setting
- Easily set your bit for the correct drilling depth
- 3/8″ HSS Step Drill Bit
- Made from high-speed steel the PocketBit with 1/4″ hex shaft is designed to reduce clogging and provide smooth and precise holes
- 3/8″ Split Design Stop Collar With Flat
- The split design prevents slipping of the set screw when tightened and the flat prevents the bit from rolling
- Includes hex key for tightening
- Quick Change Compatible Connector
- With the Milescraft Connector, you can quickly change from drilling to driving
- Accepts all 1/4″ hex bits
- Quickly and easily change from drilling to driving
- 3” And 6” Magnetic T20 Torx® Drivers
- For maximum torque settings without stripping
- To allow pocket screws to align with maximum precision
- Rugged Storage Case
- With designated places for components, you will never have to go digging through your toolbox for your pocket hole jig again
- Storage compartment for 2″ FaceClamp
- Storage slot for PocketJig100
Includes:
- Double Barrel Pocket Hole Jig
- Quick Connect
- 3" & 6" T-Star Driver Bits
- 3/8" PocketBit
- 60 Piece T20 Pocket Hole Screws
- Pocket Plugs
- 3/8" Split Design Stop Collar with Hex Key
- Instruction Manual
Specs:
- Material: Reinforced Nylon
- Drill Guide Bushing Spacing: 1"
- Clamping Method: Works with any clamp
- For use with: Wood Materials for 1/2" to 1.5 thick (12-38mm)
- Drilling Angle: 15°
- Screw and Driver Style: T20 Torx
- Screws: 10 of each: 1” (25mm), 1.25” (32mm) coarse and fine, 1.5” (38mm), 2” (51mm), 2.5” (64mm)
- Drivers: 3" T20 Magnetic Head Driver and 6" T20 Magnetic Head Driver
- Pocket Plugs: 10 plugs
- Connector: Accepts all 1/4" hex bits
- Drill Bit: 3/8" (9.5mm) HSS Pocket Bit with 1/4" shank