Milescraft 1326 Pocket Jig 300

Milescraft 1326 Pocket Jig 300

The Milescraft PocketJig300 heavy-duty pocket hole jig is the ideal solution for bigger projects. Whether you’re building decks, fences, outdoor furniture, or framing walls, this HD jig has you covered!

Features:

• PocketJig300 HD Pocket Hole Jig Kit – Designed For Bigger Builds
  • For use on materials 1-1/2″  (38mm) and larger
  • Perfect for 2 x 4 projects
  • 50% stronger joints than using standard pocket hole jigs
• Hardened Steel Drill Bushings
  • For precise and accurate 1/2″ (12.7mm) pocket holes
• Thick Durable Fence
  • Flip down when drilling new pocket holes
  • Keep up when doing repairs
• Recessed Clamp Pocket
  • Keeps the clamp in the same position as you move to different locations
  • With the rare Earth magnet, you can easily move the jig from one location to another
  • For speed and accuracy, use with Milescraft FaceClamps
• Convenient Built-In Depth Stop Setting
  • Easily set your bit for the correct drilling depth
• Magnetic T25 Torx® Driver
  • For maximum torque settings without stripping
  • To allow pocket screws to align with maximum precision
  • 1/4″ (6.35mm) hex shank is quick change compatible
• 1/2″ HSS Step Drill Bit
  • Made from high-speed steel
  • Eliminates clogging and provides smooth and precise holes
  • 1/4″ (6.35mm) hex shank is quick change compatible
• 1/2″ Split Design Stop Collar With Flat
  • The split design prevents slipping of the set screw when tightened and the flat prevents the bit from rolling
• Rugged Storage Case
  • With designated places for components, you will never have to go digging through your toolbox for your pocket hole jig again

Includes:

• (1) HD Pocket Hole Jig
• (1) 1/2" (12.7mm) Split Design Stop Collar with Flat
• (1) Hex key
• (1) 1/2" (12.7mm) PocketBit
• (1) 6" (150mm) T25 Torx® Driver
• (10) 2-1/2" (63.5mm) T25 Coarse Screws

Specs:

• Jig Material: Reinforced Nylon
• Drill Guides: (2) 1/2" (12.7mm) diameter
• Drill Guide Bushing Spacing: 1-7/16" (36mm)
• Clamping Method: Works with any clamp
• For use with: 1-1/2" (38mm) and thicker material
• Drilling Angle: 15°
• Screws: 2.5″ (63.5mm) HDPocketScrews, T25 Torx Drive (10 pcs.)
• Driver: 6" Magnetic T25 Torx® Driver, 1/4" (6.35mm) shank
• Drill Bit: 1/2" (12mm) HSS Pocket Bit, 1/4" (6.35mm) shank

Compatible with:

• T25DriverSet
• HDPocketBit
• 2.5" HDPocketScrews